Part Number Hot Search : 
78L08 XCXXX TDB7711 C100M SD1602 CY7C135 SM15T39A PTMR0730
Product Description
Full Text Search
 

To Download EML17 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 EML17
Transistors
General purpose transistor (isolated transistor and diode)
EML17
DTA144E and a RB520G-30 are housed independently in a EMT package.
Applications DC / DC converter Motor driver
External dimensions (Unit : mm)
EML17
1.6 1.0 0.5 0.5
(5) (4)
0.5
1pin mark
Features 1) Tr : Degital Transistor Di : Low VF 2) Small package
1.6 1.2
(1) (2) (3)
0.22
0.13
Each lead has same dimensions
Structure Silicon epitaxial planar degital transistor Schottky barrier diode
Equivalent circuit
(5)
(4)
Tr2
Di1
R1
R2
(1) (2)
(3)
R1=R2=47k
Packaging specifications
Type Package Marking Code Basic ordering unit (pieces) EML17 EMT5 L17 T2R 8000
1/3
EML17
Transistors
Absolute maximum ratings (Ta=25C) Di1
Parameter Symbol Limits VR 30 DC current voltage IO 100 Mean rectifying current 500 Forward peak surge current (60HZ 1cyc.) IFSM Tj 125 Junction temperature Tstg -40 to +125 Storage temperature 60Hz, 1 Unit V mA mA C C
Tr2
Parameter Supply voltage Input voltage Output current Power dissipation Junction temperature Symbol VCC VIN IO IC(MAX) Pd Tj Limits -50 -40 to +10 -30 -100 120 150 Unit V V mA mW C
Di1, Tr2
Parameter Symbol Pd Power dissipation Tstg Range of storage temperature
Each terminal mounted on a recommended land.
Limits 150 -55 to +125
Unit mW C
Electrical characteristics (Ta=25C) Di1
Parameter Forward voltage Reverse current
Please pay attention to static electricity when handling.
Symbol VF IR
Min. - -
Typ. - -
Max. 0.45 0.5
Unit V A IF=10mA VR=10V
Conditions
Tr2
Parameter Input voltage Output voltage Input current Output current DC current gain Input resistance Resistance ratio Transition frequency
Transition frequency of the device
Symbol VI(off) VI(on) VO(on) II IO(off) G1 R1 R2/R1 fT
Min. - -3.0 - - - 68 32.9 0.8 -
Typ. - - -0.1 - - - 47 1 250
Max. -0.5 - -0.3 -0.18 -0.5 - 61.1 1.2 -
Unit V V mA A - k - MHz
Conditions IC= -5V, IO= -100A VO= -0.3V, IO= -2mA IO/II= -10mA/ -0.5mA VI= -5V VCC= -50V, VI=0V VO= -5V, IO= -5mA - - VCE= -10V, IE=5mA, f=100MHz
2/3
EML17
Transistors
Electrical characteristic curves Di1
CAPACITANCE BETWEEN TERMINALS : CT (pF)
1000
1000000
150 C
100
FORWARD CURRENT : IF (mA)
100
150 C
100000
-25 C
25 C
REVERSE CURRENT : IR (nA)
125 C
10 1 0.1 0.01
10000 1000 100 10
75 C
75 C
125 C
10
25 C
-25 C
0.001 0
100
200
300
400
500
600
700
1 0
10
20
30
40
1 0
5
10
15
20
25
30
FORWARD VOLTAGE : VF (mV)
REVERSE VOLTAGE : VR (V)
REVERSE VOLTAGE : VR (V)
Fig.1 Forward characteristics
Fig.2 Reverse characteristics
Fig. 3 Capacitance between terminals characteristics
Tr2
-100 -50 VO=-0.3V
-10m VCC=-5V -5m
1k 500
DC CURRENT GAIN : GI
VO=-5V
Ta=100C 25C -40C
OUTPUT CURRENT : Io (A)
INPUT VOLTAGE : VI(on) (V)
-2m -1m -500 -200 -100 -50 -20 -10 -5 -2 -1 0
-20 -10 -5 -2 -1 -500m -200m -100m -100 -200 -500 -1m -2m -5m -10m -20m -50m-100m Ta=-40C 25C 100C
Ta=100C 25C -40C
200 100 50 20 10 5 2
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
1 -100 -200 -500 -1m -2m
-5m -10m -20m -50m-100m
OUTPUT CURRENT : IO (A)
INPUT VOLTAGE : VI(off) (V)
OUTPUT CURRENT : IO (A)
Fig.4 Input voltage vs. output current (ON characteristics)
Fig.5 Output current vs. Input voltage (OFF characteristics)
Fig.6 DC current gain vs. output current
-1
OUTPUT VOLTAGE : VO(on) (V)
-500m -200m -100m -50m -20m -10m -5m -2m
lO/lI=20
Ta=100C 25C -40C
-1m -100 -200 --500 -1m -2m
-5m -10m -20m -50m-100m
OUTPUT CURRENT : IO (A)
Fig.7 Output voltage vs. output current
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1


▲Up To Search▲   

 
Price & Availability of EML17

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X